UTStarcom Handset - Manual (Page 17)

Getting Started
9
1.4 LCD Display
Icons Descriptions
Current signal strength: the more lines, the stronger the
signal.
Phone cannot receive a signal from the system.
Call is in progress.
E911 only.
Location Service is on.
Vibration alert mode on.
Silence alert mode on.
Appears when either an event or an alarm is set.
Phone is roaming (out of service area).
Phone is in Speaker Phone mode.
Phone is in TTY mode.
Phone is in emergency mode.
Phone is in Digital mode.
Phone is in the 1X service area.
Unread text message
Urgent unread message: Blinking
Normal unread message: ON
No unread message: Turn OFF
Unread voice message.