Acroprint ATR9800 - Manual (Page 30)

ATR9800 User Guide
28 Schedules
Period Limit: Enter the threshold at which overtime is accrued on a period limit.
Force Overtime for IN punches Between: Forces any time accrued between the start and stop
time to be accrued as overtime. This can be used to setup blocks of time outside the normal
shift time that employees can accrue overtime.
At overtime level: Sets the overtime level at which this time will be accrued.
Force Overtime for time outside of defined shifts: Causes any time accrued outside of the
employees defined shift start and stop time to be accrued as overtime. For example, their
schedule has one shift 08:00 to 17:00. They clock in at 07:00 and clock out at 18:00. They will
accrue 2 hours of overtime (07:00 – 08:00 and 17:00 – 18:00)
At level: Sets the overtime level at which this time will be accrued.
Force Overtime by Day of the Week: Forces any time accrued on the specified day to be
accrued towards overtime.
Keep in level over day change: Forces overtime to be accrued until the employee clocks out.
If left unchecked and employees are on the clock when a new day occurs and that day is not
flagged to pay overtime, their overtime accrual will stop at the day change time.
Fixed Shifts and Time Rounding
Fixed shifts define the start and stop time for employees. There are three shifts per schedule.
Start/Stop: Enter the start time and stop time for the shift.