Acroprint ATR9800 - Manual (Page 39)

ATR9800 User Guide
Access Control 37
Access Control
Access control is used to control external security devices such as security doors.
For Access Control to work you must:
♦
Configure the access parameters under clock maintenance.
♦
Configure the appropriate function key under clock configurations.
♦
Assign the employee/employees to the access table.
♦
Have the Acroprint relay kit attached to clock.
Access Only Clock: Check if the clock will only be used for access and not to store time
transactions.
Access Control: Check if the clock will be used for access control.
Always Open Start Time: Used in conjunction with “Open on Sun-Sat” to define a period of
time in which access is always granted.
Open on Sun-Sun: Used to define days of the week in which access is always granted.
Access Duration: Length of time relay signal is active.
All Badges: If using profiles in conjunction with access control, checking this block tells the
clock to allow access to all badges that pass the profile check. If unchecked the clock will act
as normal and first check to see if the badge is in the profile table. If found the clock will then
check to see if the badge is in the access table and if it is found there the relay will activate and
allow access.