Acroprint ATR9800 - Manual (Page 45)

ATR9800 User Guide
Clocks 43
Clocks
To add a clock to the system go to Clocks\Clocks\Edit. On the Icon Bar select the add icon.
Clock ID: Up to 10 alphanumeric characters. Use the clock ID when selecting this clock
throughout the software.
Terminal ID: Enter the internal number of the actual clock that this entry represents. Each clock
entered on the system must have a unique internal ID number.
Terminal Name: Up to 20 alphanumeric characters. Enter a name or a description to help
identify this clock in the software.
Configuration: Enter in the configuration to be used with this clock. The configuration must
already exist in clock configurations. A clock can be assigned only one configuration. If you have
multiple clocks they can all share one configuration or they can be assigned an individual
configuration. A case in which they would use one configuration is if each clock will have the
same display prompt and will function identically.
Lockout: If using the Profile Lockout Module this entry block will be visible. Enter the profile
number to download to the clock.
Bell Schedule: If using the Bell Schedules Module this entry block will be visible. Enter the bell
schedule number to download to the clock.
Time Diff. Between Comp. & Clock: Since the computer is used to set the clocks and the
computer may not always reside in the same time zone as the clock, this field allows you to enter
the time differences between the computer and clocks. Upon setting the clock time, the system