Acroprint ATR9800 - Manual (Page 47)

ATR9800 User Guide
Fingerprint Unit 45
Fingerprint Unit
If you are using the fingerprint unit in conjunction with the clock, the fingerprint parameters must
be entered at this tab. With the FIU unit (Fingerprint Identification Unit) each transaction is
validated with the employee fingerprint before the transaction is processed.
Fingerprint Unit Use Level: This entry turns on the FIU circuitry within the clock. It also sets
the reader sensitivity level, 5 being the most sensitive and 1 being the least sensitive.
Max. of Fingerprints: Indicates the maximum number of fingerprints to use. This entry can be
from 1 to 999.
# of fingerprints per Badge: Each badge can be used with up to three fingerprints. If badges are
assigned more than one fingerprint, the maximum number is decreased. Using two fingerprints
per badge, the maximum number that can be used is 499; with three fingerprints per badge, the
maximum number is 333.
FIU Security Code: This number is used to identify the reader that is attached to a particular
clock. Once programmed with this number that reader must remained attached to that clock. If
another FIU reader is used with the clock an error will occur.
Timeout to Read Fingerprint: Indicates the maximum amount of time the FIU reader will
attempt to recognize the fingerprint. This entry is entered in tenths of a second. Example: an entry
of 10 = 1 second.