AASTRA 6730i (Version 3.2) User Guide EN - Manual (Page 148)

Additional Features
142
41-001376-00 Rev 01 – 06.2013
XML Beep Support
Using the Aastra Web UI, you can enable or disable a beep to be audible when the phone receives an XML application
using the "XML Beep Support" field at the path Basic Settings->Preferences->General. If you disable this feature, then no
beep is heard when the XML application arrives to the phone.
If your System Administrator has set a value for this feature in a custom XML application or in the configuration files, the
value you set in the Aastra Web UI overrides the Administrator’s setting. Setting and saving the value in the Aastra Web
UI applies to the phone immediately.
Configuring XML Beep Support
Use the following procedures to configure an XML beep on the IP phone.
Aastra Web UI
Note:
"XML Beep Support" is enabled by default.
1. Click on Basic Settings->Preferences->General.
2. "XML Beep Support" is enabled by default. If required, disable the "XML Beep Support" field by unchecking the check
box.
3. Click Save Settings.