AASTRA 6730i (Version 3.2) User Guide EN - Manual (Page 156)

Additional Features
150
41-001376-00 Rev 01 – 06.2013
Message Waiting Indicator
You can configure the Message Waiting Indicator (MWI) to illuminate for a specific line or for all lines. For example, if you
configure the MWI LED on line 3 only, the LED illuminates if a voice mail is pending on line 3. If you configure the MWI
LED for all lines, the LED illuminates if a voice mail is pending on any line on the phone (lines 1 through 6).
You configure the MWI indicator using the Aastra Web UI.
Configuring Message Waiting Indicator
Use the following procedure to configure the message waiting indicator on a specific line or on all lines on the IP phone.
Aastra Web UI
Note:
"Message Waiting Indicator Line" parameter is set to ALL lines by default.
1. Click on Basic Settings->Preferences->General.
2. The "Message Waiting Indicator Line" field is set to ALL lines by default. If required, change the setting to a specific
line by selecting a line from the list. Valid values are All and lines 1 through 6.
3. Click Save Settings.