Intercom key, Configuring an intercom key, Line keys and programmable keys – AASTRA 6730i (Version 3.2) User Guide EN User Manual
Page 89
Line Keys and Programmable Keys
41-001376-00 Rev 01 – 06.2013
83
Intercom Key
By default, the IP phone allows incoming intercom calls to be automatically answered without having to set up an Icom
key on your phone. For more information about changing the behavior of incoming Intercom calls, see the section
“Incoming Intercom Call Features”
.
Your System Administrator can enable outgoing intercom calls on your phone. If enabled, you must configure an Icom key
on your phone to use for outgoing intercom calls. You must configure a programmable key with the function, “Intercom”.
Use the following procedure to configure a key as an Icom key using the Aastra Web UI.
Configuring an Intercom Key
Aastra Web UI
Note:
Keys 5 and 6 (SAVE and DELETE keys) can be made configurable ONLY by your System Administrator.
1.
Click on Operation->Programmable Keys.
2.
Select from "Key 1" through "Key 8". (Keys 5 and 6 can be made configurable only by your system administrator.)
3.
In the "Type" field, select Intercom (Icom).
4.
Click Save Settings.