AASTRA 6730i (Version 3.2) User Guide EN - Manual (Page 64)

Line Keys and Programmable Keys
58
41-001376-00 Rev 01 – 06.2013
BLF/List Key
(For use with the BroadSoft Broadworks Rel 13 or higher platform only)
The BLF/List feature on the IP phones is specifically designed to support the BroadSoft Broadworks Rel 13 Busy Lamp
Field feature.
This feature allows the IP phone to subscribe to a list of monitored users defined through the BroadWorks web portal.
In addition to monitoring the idle and busy state, the BLF/List feature also supports the ringing state. On the 6730i
phone, the LED lights next to each BLF key illuminate steady to indicate the monitored line is off-hook or unregistered.
The LED goes off when the is idle. When the monitored extension is ringing, the LED flashes.
For Example
A receptionist has a 6730i running Broadsoft firmware that subscribes to a list of extensions from the BroadWorks Appli-
cation Server. On the 6730i running Broadsoft firmware, the key LEDs illuminate either flashing, solid, or turn off depend-
ing on the state of those extensions.
Note:
Your System Administrator must have BLF/List enabled on the BroadWorks Server. Contact your System Administrator
for more
Note:
You can use a BLF/List configured key to dial out.
Note:
The Broadworks BLF feature is not the same as the Broadworks Shared Call Appearance (SCA) feature and does not per-
mit call control over the monitored extension.