Sprecode key, Configuring a sprecode key, Line keys and programmable keys – AASTRA 6730i (Version 3.2) User Guide EN User Manual
Page 77
Line Keys and Programmable Keys
41-001376-00 Rev 01 – 06.2013
71
Sprecode Key
You can set a programmable key to automatically activate specific services offered by the server. For example, if the spre-
code value of *82 is configured, then by pressing the Sprecode key, *82 automatically activates a service provided by the
server. Contact your System Administrator for information about available services.
Configuring a Sprecode Key
Use the following procedure to configure a sprecode key on the 6730i phone.
Aastra Web UI
Note:
Keys 5 and 6 (SAVE and DELETE keys) can be made configurable ONLY by your System Administrator.
1.
Click on Operation->Programmable Keys.
2.
Select from "Key 1" through "Key 8". (Keys 5 and 6 can be made configurable only by your system administrator.)
3.
In the "Type" field, select Sprecode.
4.
In the "Value" field, enter the appropriate value for accessing specific services from the server.
Note:
For values to enter in this field, contact your System Administrator.
5.
Click Save Settings.