None key, Setting a none key, Line keys and programmable keys – AASTRA 6730i (Version 3.2) User Guide EN User Manual
Page 97
Advertising
Line Keys and Programmable Keys
41-001376-00 Rev 01 – 06.2013
91
None Key
You can set a key to force a blank entry on the IP phone display for a specific key. You do this by setting the key to "none".
If a particular key is not defined, it is ignored.
Setting a None Key
Use the following procedure to configure a None key on the 6730i IP Phone
Aastra Web UI
Note:
Keys 5 and 6 (SAVE and DELETE keys) can be made configurable ONLY by your System Administrator.
1.
Click on Operation->Programmable Keys.
2.
Select from "Key 1" through "Key 8". (Keys 5 and 6 can be made configurable only by your system administrator.)
3.
In the "Type" field, select None.
4.
Click Save Settings.
Advertising