Configuring directed call pickup (dcp) key, Line keys and programmable keys – AASTRA 6730i (Version 3.2) User Guide EN User Manual
Page 71
Line Keys and Programmable Keys
41-001376-00 Rev 01 – 06.2013
65
Configuring Directed Call Pickup (DCP) Key
Use the following procedure to configure Directed Call Pickup using the Aastra Web UI.
Aastra Web UI
Note:
Keys 5 and 6 (SAVE and DELETE keys) can be made configurable ONLY by your System Administrator.
1.
Click on Operation->Programmable Keys.
2.
Select from "Key 1" through "Key 8". (Keys 5 and 6 can be made configurable only by your system administrator.)
3.
In the “Type” field, select Directed Call Pickup.
4.
In the “Value” field, specify the extension you want to intercept when you press this key. For example: 2200.
5.
In the "Line" field, select the line for which to apply the Directed Call Pickup configuration. Valid values are 1 through 6.
6.
Click Save Settings.