AASTRA 6730i (Version 3.2) User Guide EN - Manual (Page 158)

Additional Features
152
41-001376-00 Rev 01 – 06.2013
Configuring Incoming Intercom Settings
Use the following procedure to configure incoming Intercom settings on the IP phone.
Using Redial Key for “Last Number Redial”
The IP phone has an enhanced redial user interface that allows a user to quickly redial the last number that was dialed
out from the phone. You can:
• Press the REDIAL key twice to redial the last number dialed.
• Press the REDIAL key once, scroll the list of numbers, then press the REDIAL key again to dial the number that displays
on the screen.
The “last number redial” feature for the Redial key is static and is not configurable.
Aastra Web UI
1. Click on Basic Settings->Preferences->Incoming Intercom Settings.
2. The "Auto-Answer" field is enabled by default. The automatic answering feature is turned on for the IP phone for
answering Intercom calls. To disable this field, uncheck the box.
Note:
If the Auto-Answer field is not checked (disabled), the phone treats the incoming intercom call as a normal call
3. The "Microphone Mute" field is enabled by default. The microphone is muted on the IP phone for Intercom calls
made by the originating caller. To disable this field, uncheck the box.
4. The "Play Warning Tone" field is enabled by default. If “Auto-Answer” is enabled, the phone plays a warning tone
when it receives in incoming intercom call. To disable this field, uncheck the box.
5. The "Allow Barge In" field is enabled by default. If “Allow Barge In” is enabled, the phone puts an active call on hold
and answers the incoming Intercom call. To disable this field, uncheck the box.
6. Click Save Settings.