Flash key, Configuring a flash key, Line keys and programmable keys – AASTRA 6730i (Version 3.2) User Guide EN User Manual
Page 66
Advertising
Line Keys and Programmable Keys
60
41-001376-00 Rev 01 – 06.2013
Flash Key
You can set a programmable key to generate a flash event when it is pressed on the 6730i. You do this by setting the key
to "flash". The IP phone generates flash events only when a call is connected and there is an active RTP stream (for exam-
ple, when the call is not on hold).
Configuring a Flash Key
Aastra Web UI
Note:
Keys 5 and 6 (SAVE and DELETE keys) can be made configurable ONLY by your System Administrator.
1.
Click on Operation->Programmable Keys.
2.
Select from "Key 1" through "Key 8". (Keys 5 and 6 can be made configurable only by your system administrator.)
3.
In the "Type" field, select Flash.
4.
Click Save Settings.
Advertising