EVS IPDirector Version 6.0 - November 2012 Part 5 User's Manual - Manual (Page 102)

2. Select Edit Config.
The IPDirector Configuration window opens:
This window allows you to link a player channel of one specific EVS video server to
one Video Display (Video Board).
3. Check the box in the Linked column corresponding to the player channel you want to
link to the video display.
4. Select which video display device it must be linked to from the drop down list in the
Video Display column.
Note
The linked box can be checked without being linked to a Video Display. For
example, this is used when an external monitor is connected to your
workstation.
5. Click Save.
Note
All these parameters are local to the IPDirector workstation and must be set
independently on all IPDirector Workstations using the Remote Installer tool.
3.2.4. Opening the Video Display
To open the Video Display panel, select the corresponding icon on the
IPDirector Application bar.
92 3. Video Display
EVS Broadcast Equipment S.A. - November 2012 Issue 6.00.B