How to change the speed of the loaded item – EVS IPDirector Version 6.0 - November 2012 Part 5 User's Manual User Manual
Page 78
It can also be used if the channel is part of a
•
Gang group: the speed is applied to all the channels of the group at the same time.
•
Fill & Key association: the speed is applied to all the channels of the group at the
same time.
•
PGM/PRV association: the speed is only applied to the PGM channel.
This function cannot be used when
•
The channel is IDLE or no channel is associated to the window
•
The user does not have the right to control the channel
•
The channel is controlled by another device
•
The channel is locked
•
A timeline is loaded on the channel
How to Change the Speed of the Loaded Item
To change the speed of the loaded item, proceed as follows:
1. Press the
key
or
right-click the Fast Forward or Fast Rewind button and select Custom Speed from
the contextual menu.
The Set Speed window is displayed:
2. Enter the speed value from 0 to 300%.
3. Click OK.
The playout of the element starts if it was cued or paused. If the element was being
played out, the speed changes.
The speed value is displayed in the Speed field above the Play button.
68
1. Control Panel
EVS Broadcast Equipment S.A. - November 2012
Issue 6.00.B