EVS IPDirector Version 6.0 - November 2012 Part 5 User's Manual - Manual (Page 35)

When a train is loaded, no time information is displayed. As soon as an IN point is
marked, the IN field is filled in; as soon as an OUT point is marked, the Duration and the
OUT information are displayed.
Timecode Fields Display
Information displayed in the Time Information fields can be changed as follows:
1. Right-click the Timecode field.
The following contextual menu is displayed:
◦ Timecode
◦ Timecode and date
2. Select one of the options.
1.2.6. Clip Information Tab
Introduction
The Clip Information tab on the Tabs Pane provides information on the clip, or recording
ingest, loaded on the player.
From this area, users can update the clip metadata. See section "Modifying Clip
Metadata" on page 78.
They have access to most of the options from the Control Panel contextual menu. See
section "Control Panel Contextual Menu" on page 16.
If a train, a timeline or a playlist is loaded, the fields on the Clip Information tab are
unavailable.
IPDirector - Version 6.00 - User Manual - Control Panel
1. Control Panel 25