Publishing a clip, Introduction, How to publish a clip to a user group – EVS IPDirector Version 6.0 - November 2012 Part 5 User's Manual User Manual
Page 91
•
Defining audio and/or video transition effect
•
Defining still/start mode
•
Resetting transition to default
A macro command can only be applied
•
to a selected element in a playlist panel or
•
to a playlist element loaded on a control panel.
See
the Playlist Panel user manual
for more information on macro command
management.
Also refer to
the Playlist Panel user manual
for more information on how to configure or
modify the playlist macro commands.
1.8.
Publishing a Clip
1.8.1.
Introduction
Publishing a clip makes it visible to members of the group(s) the clip is published to.
1.8.2.
How to Publish a Clip to a User Group
The clips owner can publish the clips to make them available to other users.
To publish a clip to a user group, proceed as follows:
1. Open the clip in the Control Panel.
2. Right-click in the Control Panel.
The Control Panel contextual menu is displayed.
3. Select Publish from the contextual menu.
The Publish Clip window opens.
IPDirector - Version 6.00 - User Manual - Control Panel
1. Control Panel
81