EVS IPDirector Version 6.0 - November 2012 Part 5 User's Manual - Manual (Page 41)

1.2.8. Ganged Channels Tab
The Ganged Channels tab lists all player channels that have been ganged with the player
channel currently associated to the Control Panel and provides information on the item
currently loaded on each of them.
From this tab, users can perform the following operations:
• Play the media loaded on another channel from the group of ganged channels
• Synchronize the timecode on all the ganged channels
• Temporarily ungang some or all of the ganged channels
• Re-gang some or all of the ganged channels
• Definitely ungang a channel from the group
See section "Using Ganged Player Channels" on page 45.
1.2.9. Clip-List Tab
Introduction
The Clip-List tab makes it possible to create simple playlists from the Control Panel. This
means a list of clips with the same transition applied between all elements. If you want to
utilize a more complex set of functions in your playlist, use the Playlist Panel module.
The Clip-List tab also allows the users to play any existing playlist.
Player channels supporting the "Mix on one channel" functionality will be able to play the
transitions effects between playlist elements. For channels not supporting this
functionality, the PGM/PRV mode must be set for two channels. See section "Channel
Modes for Playout with Transition Effects" on page 42.
Note
Production playlist is a software option, which requires the license key 50 being
imported to XSecure. Without this code, playlists may be loaded on a Control
Panel and played out but may not be edited.
For more information on the required license key, contact the Support or Sales
team.
IPDirector - Version 6.00 - User Manual - Control Panel
1. Control Panel 31