Clip creation buttons and shortcuts – EVS IPDirector Version 6.0 - November 2012 Part 5 User's Manual User Manual
Page 80
1.6.3.
Clip Creation Buttons and Shortcuts
The following table gives the meaning of each clip creation operation. A button and/or a
keyboard shortcut can be used to perform each action. The ShuttlePRO device has
buttons dedicated to most of these functions as well.
Operation
User
Interface
Button
Keyboard
Shortcut
ShuttlePRO key Description
Mark IN
Sets an IN point at the
timecode shown in the
Current Timecode field
and corresponding to the
bullet indicator position in
the jog bar. Then a green
indicator represents the IN
point on the jog bar.
Mark OUT
Sets an OUT point at the
timecode shown in the
Current Timecode field
and corresponding to the
bullet indicator position in
the jog bar. Then a red
indicator represents the
OUT point on the jog bar.
Clear IN
+
+
Clears the IN point which
has just been set and not
yet saved.
The IN field is reset if an IN
point was marked on a
record train.
The IN field displays the
Protect IN field, before the
guardband, if an IN point
was marked on a clip.
70
1. Control Panel
EVS Broadcast Equipment S.A. - November 2012
Issue 6.00.B