Playing media at a custom speed, Possible ways, Context of use – EVS IPDirector Version 6.0 - November 2012 Part 5 User's Manual User Manual
Page 77
1.5.3.
Jumping to a Given Timecode within the
Loaded Media
Possible Ways
There are several ways to jump to a given timecode of a loaded media:
•
Click at one position on the jog bar
•
Click on the cursor and move it along the jog bar
•
Enter a new timecode value in the Current Timecode field and press ENTER.
Note
If the player channel is ganged with others, the same operation is performed on
all the ganged channels.
How to Shift to the Same Timecode on Another
Recorder
When you want to shift to another recorder and position yourself on the same timecode as
the loaded record train, proceed as follows:
1. Click on the Pause button to freeze the record train loaded.
2. Right-chick on the E/E button to open the contextual menu.
3. Choose the recorder you want to display.
The visual display shifts to the selected recorder at the same timecode position as the
first recorder.
1.5.4.
Playing Media at a Custom Speed
Context of Use
This function can be used when the following element types are loaded on a channel,
would it be cued, paused, or being played out:
•
Clip
•
Growing clip
•
Train
•
Playlist element
IPDirector - Version 6.00 - User Manual - Control Panel
1. Control Panel
67