EVS IPDirector Version 6.0 - November 2012 Part 5 User's Manual - Manual (Page 71)

1.4.5. Loading a Timeline
How to Load a Timeline from the Database Explorer
To load the timeline, proceed as follows:
1. Open the Control Panel and assign a player channel or the Software Player.
2. Open the Database Explorer from the main menu.
3. In the Timelines view of the Database Explorer, select the requested timeline in the
Elements grid.
4. Drag it onto the Loaded Media field of the Control Panel.
The timeline will then be loaded on the IN point of the first element.
The IPEdit mode (also called Lock Timeline mode) is automatically activated.
If the channel does not support the "Mix on one channel" functionality, this is highlighted
as follows:
Then, two player channels are set to Timeline mode to enable the effects between
timeline elements to be played out.
If the channel supports the "Mix on one channel" functionality, this is highlighted as
follows:
Then, effects between timeline elements can be played on one channel.
1.4.6. Loading a Media with the Take Function in
PGM/PRV Mode
+
If the channel is in PGM/PRV mode, the Take function shifts from the current media on
the PGM channel to the media on the associated PRV channel using the Take Effect
settings as defined in Tools > Settings > Clips > Take.
If a clip is loaded on the PGM channel and a train is being played on the PRV channel, the
Take function will load the train on the PGM channel and the clip on the PRV channel.
See the General Functions user manual for more information on the Take settings. This
function is only available from a shortcut.
IPDirector - Version 6.00 - User Manual - Control Panel
1. Control Panel 61