EVS IPDirector Version 6.0 - November 2012 Part 5 User's Manual - Manual (Page 68)

How to Load a Clip from the Database Explorer
To load a clip on a channel from the Database Explorer, proceed as follows:
1. Open the Control Panel and assign a player channel or the Software Player.
2. Open the Database Explorer from the main menu.
3. In the Clips view or Clip Elements view of the Database Explorer, select the
requested clip in the Elements grid.
4. Load it in one of the following ways:
◦ drag it to the Loaded Media field of the Control Panel.
◦ press ENTER, if you have previously associated the same player to the Control
Panel and to the Database Explorer.
◦ double-click the line if you have previously associated the same player to the
Control Panel and to the Database Explorer.
A clip element is loaded on the Software Player according to the rules defined in "Loading
Rules for the Software Player" on page 59.
How to Load a Linked Clip
Linked clips are clips created at the same time by ganged recorder channels. They
correspond to different angles of the same recorded media.
When a clip already loaded on a player has linked clips, it is possible to rapidly load one of
them in one of the following ways:
• Double-click the linked clip in the Linked To Clips list of the Clip Information tab.
58 1. Control Panel
EVS Broadcast Equipment S.A. - November 2012 Issue 6.00.B