EVS IPDirector Version 6.0 - November 2012 Part 5 User's Manual - Manual (Page 76)

The Custom Speed window allows you to enter a value.
The speed value is displayed in the Speed field above the Play button. This operation
does not affect the default Fast Forward or Fast Rewind speed values.
Playlist Transport Buttons and Shortcuts
Besides the usual transport functions that can be used for the playlist as well and are
available in the Transport Functions pane, several functions specific to the playlist are
available in the upper part of the Clip-List tab.
The following table gives the meaning of each transport operation which can be used
specifically with a loaded playlist. A button and/or a keyboard shortcut can be used to
perform each action.
Operation
User
Interface
Button
Keyboard
Shortcut ShuttlePRO
key
Description
Recue Loads the playlist on the first frame
of the first element.
This button is dimmed and not
active if the playlist is on air.
Next If the playlist is in PLAY, the next
element is loaded immediately and
played accordingly to its start
mode and start effect.
If the playlist is in PAUSE, the
playlist jumps to the IN point of the
next element of the playlist but
remains paused.
Skip Skips the next element during the
playout of the playlist so it will not
play.
If the button is clicked twice, the
next 2 elements will be skipped,
and so on
66 1. Control Panel
EVS Broadcast Equipment S.A. - November 2012 Issue 6.00.B