EVS IPDirector Version 6.0 - November 2012 Part 5 User's Manual - Manual (Page 93)

1. Load the clip in the Control Panel.
2. Right-click anywhere in the Control Panel (except in the Linked to Clips list and in the
Clip-List tab).
3. Select the requested destination from the Send to contextual menu.
The clip is sent to the requested destination. A new record is added in the Clip Sent To list
where you can see the transfer status and access more information on the transfer via the
contextual menu.
1.9.4. How to Send a Playlist to an External
Destination
It is possible to transfer a playlist to a destination target if the destination target is set up to
allow such transfer. For more information, see the IPDirector Technical Reference
Manual.
To send a playlist to a destination target, proceed as follows:
1. Load the playlist in the Control Panel.
2. In the Clip-List tab, right-click the Playlist field.
3. Select the requested destination from the Send to contextual menu.
The playlist is sent to the requested destination.
1.10. Exporting and Importing Playlists
1.10.1. How to Export a Playlist
You can export a playlist in the .xml or .csv formats. The .xml files can later be imported
into an IPDirector system, whereas the .csv files are only for export purposes.
To export a playlist, proceed as follows:
1. When the playlist to export is displayed in the Clip-List tab, right-click the Playlist
Name field.
The Playlist contextual menu is displayed.
2. Select Export.
The Export Playlist window opens.
Set T/C Track window opens
3. Type the T/C to be used in the export file for the IN point of the first playlist element.
This timecode will also be the initial timecode of the T/C track calculated for the whole
playlist.
4. Click OK.
The Export Playlist window opens.
5. Select the directory to which you want to export the playlist.
6. Select the format for the playlist in the Save as type drop-down list.
IPDirector - Version 6.00 - User Manual - Control Panel
1. Control Panel 83