EVS IPDirector Version 6.0 - November 2012 Part 5 User's Manual - Manual (Page 64)

Selecting a recorder channel loads the corresponding train at its current recording position
and plays it on the selected player. The E/E button turns blue only when a train is loaded
and playing live.
Selecting a recording ingest directly loads it at its currently recording position (OUT point)
and plays it.
From the Loaded Media Field
When a train or a recording ingest has already been loaded during the current session, it is
listed in the list available from the Loaded Media field. This list shows the last 20 items
that you have loaded on the channel during the current session.
Click the arrow next to the Loaded Media field and select an item from the list:
How to Select a Train with the ShuttlePRO Key
A player channel must have been selected from the ShuttlePRO and associated to the
Control Panel.
To select a train with the ShuttlePRO, proceed as follows:
1. Press the Select Train key .
2. This calls up on the screen a list of available recorder channels:
54 1. Control Panel
EVS Broadcast Equipment S.A. - November 2012 Issue 6.00.B