Locking a player channel, How to control a player with the shuttlepro, Purpose – EVS IPDirector Version 6.0 - November 2012 Part 5 User's Manual User Manual

Page 50

Advertising
background image

You can only open one instance of the Software Player at a time in IPDirector. If an
instance of the Software Player is already open in a Control Panel, an error message
prevents you from opening the Software Player.

How to Control a Player with the ShuttlePRO

If you select a player in the Control Panel and then take control of it with a ShuttlePRO,
you will be able to perform actions on the Control Panel by using the ShuttlePRO
commands.

To control a player channel or the Software Player with the Shuttle PRO, proceed as
follows:

1. Press the Select Player key on the ShuttlePRO controller.

This calls up a list of players available to be controlled.

2. Use the jog dial to move through the list and highlight the required player channel or

Software Player.

3. Press the Select Player key again to assign the channel and exit the menu.

Refer to the ShuttlePRO section of the manual for more information on the controller.

1.3.3.

Locking a Player Channel

Purpose

It is possible to lock the player channel to prevent any operation from any IPDirector user
interface. However, the Remote Panel in LSM exclusive or parallel mode will maintain
control or be able to regain the control if the channel has been locked from the IPDirector
interface.

40

1. Control Panel

EVS Broadcast Equipment S.A. - November 2012

Issue 6.00.B

Advertising