EVS IPDirector Version 6.0 - November 2012 Part 5 User's Manual - Manual (Page 103)

To open the Video Display within a Control Panel or a Playlist Panel, you need to assign
the player channel linked to the A/V board to the corresponding panel. Then, you can hide
or unhide the Video Display by right-clicking the panel and selecting Show/Hide Video
Display.
3.2.5. Selecting the A/V Board in the Video Display
When you open the Video Display module, you need to select the A/V board to be able to
view the channel associated to the board.
To do so, proceed as follows:
1. Right-click the Video Display window.
A contextual menu is displayed with the names of the A/V board(s) connected to the
IPDirector workstation.
2. Select EVS AVH.
The media loaded on the player channel linked to the A/V board will be displayed in the
Video Display window.
3.3. Using the Software Player and the Video
Display
3.3.1. Introduction
The Software Player acts as media viewer and allows the users to browse media through
the GigE network. See section "Software Player" on page 88 for more details.
3.3.2. Opening the Video Display
Media browsed through the Software Player can be viewed in the Video Display module,
provided that the Software Player has previously been assigned to a Control Panel or a
Playlist Panel. See section "Assigning a Player Channel or the Software Player" on page
39 for the Control Panel and
the Playlist Panel user manual for the Playlist Panel. The
Software Player option will then be available when right-clicking the Video Display
window:
IPDirector - Version 6.00 - User Manual - Control Panel
3. Video Display 93