Clip creation pane, Introduction, Overview of the clip creation pane – EVS IPDirector Version 6.0 - November 2012 Part 5 User's Manual User Manual

Page 33

Advertising
background image

Each tag is represented by a numbered bullet if the different timecodes are not too close to
each other. If tags have the same timecode or if timecodes are too closed to be
distinguished on the Panel, a single bullet will be displayed with the highest number of the
tag:

When the operator clicks a tag bullet in the Control Panel, the Tag Information window is
displayed.

When the operator double-clicks a tag bullet in the Control Panel, the system jumps to the
timecode associated to the tag.

See

the Playlist Panel user manual

for more information on tag management.

1.2.5.

Clip Creation Pane

Introduction

The Clip Creation pane provides the functions to create clips.

Overview of the Clip Creation Pane

The Clip Creation pane contains the main areas highlighted on the following screenshots
and shortly described in the table below.

IPDirector - Version 6.00 - User Manual - Control Panel

1. Control Panel

23

Advertising