EVS IPDirector Version 6.0 - November 2012 Part 5 User's Manual - Manual (Page 34)

Area Description / See also…
1. Time
Information
fields Those fields provide information on the duration and IN and OUT
points of the loaded item.
See section "Time Information Fields" on page 24.
They can be used to create a clip. See section "How to Create a Clip"
on page 72.
2. Clip
Creation
commands Those commands are used to create a clip from the loaded media.
See section "Clip Creation Buttons and Shortcuts" on page 70 for the
list of clip creation buttons, shortcuts and ShuttlePRO keys.
Note
The GoTo IN and GoTo OUT functions are described in
section "General Transport Buttons and Shortcuts" on page
62.
The Append Clip button is described in section "Adding
Elements to a Playlist" on page 79.
3. Last
Created
Clips list This field displays the last created clip and provides a drop-down list
with:
• the last 50 clips created by the user
OR
• the last 50 created clips that the user has the right to see.
The latest created clips are displayed at the top of the list. A reference
to a clip in the list includes the clip name, as well as the LSM ID and
source name.
This list can be used to select and load a clip.
See section "How to Load a Clip or a Recording Ingest from the
Control Panel" on page 57.
Time Information Fields
The following time information is displayed as follows depending on the loaded media.
1. IN field: timecode of the IN point
2. Duration field: time interval between the IN and OUT points, i.e. clip duration
3. OUT field: timecode of the OUT point
When a clip is loaded, all time information fields are filled.
When a growing clip is loaded, only the IN field is filled in. The Duration field and the OUT
field display --:--:--:--.
24 1. Control Panel
EVS Broadcast Equipment S.A. - November 2012 Issue 6.00.B