Fluke Networks CertiFiber Pro Users Manual - Manual (Page 114)

Versiv Cabling Certification Product Family
Technical Reference Handbook
92
GPU71.EPS
Figure 39. Plot Screen for a Frequency-Domain Test
 The location of the measurements. To switch between results
for the main and remote, tap REMOTE or MAIN (
 ).
 Measured values for the wire pairs.
 The limit line (in red) for the measurement.
Note
If the limit line is black, the tester does not
evaluate the measurement at those frequencies
because a dB rule applies. See “About dB Rules”
on page 116.
E
F
J G
K
M
A
B
C
D
H I
L