Fluke Networks CertiFiber Pro Users Manual - Manual (Page 210)

Versiv Cabling Certification Product Family
Technical Reference Handbook
188
Fiber IDs for Saved Results in Smart Remote Mode
If Auto Save is On and the test passed, the tester saves two
records, one for each fiber. The records have the next two IDs in
the ID list.
If you must change the ID for a fiber before you save results, set
Auto Save to Off before you do the test. Then, on the SAVE
RESULT screen, tap the Input Fiber ID or Output Fiber ID window.
Figure 84 shows unsaved and saved results for bi-directional and
uni-directional results.