Fluke Networks CertiFiber Pro Users Manual - Manual (Page 327)

Chapter 13: Test Results
Manage Results on a Flash Drive
305
To move results to a different project
1 On the MANAGE RESULTS screen, select the results you want
to move.
2 Tap MOVE.
 To move the results to a project shown in the list, tap the
project name, then tap MOVE in the confirmation dialog.
 To make a new project and move the results to the new
project, tap NEW PROJECT, enter a project name, tap
DONE, then tap MOVE in the confirmation dialog.
Note
When you move results to a different project, that
project becomes the active project.
Manage Results on a Flash Drive
You can export or import results to or from a flash drive, and
delete results on the flash drive.
 Caution
 Do not remove the USB flash drive while the LED on
the drive flashes. Doing so can corrupt the data on
the drive.
 You can lose a USB flash drive, cause damage to it,
or accidentally erase the contents of the drive. Thus,
Fluke Networks recommends that you save no more
than one day of test results on a flash drive.
Note
The tester reads only USB drives that use the FAT
format.
1 Connect a USB flash drive to the type A USB port. The tester
makes a bell sound when it detects the drive.
2 On the home screen, tap the RESULTS icon.
-continued-