Fluke Networks CertiFiber Pro Users Manual - Manual (Page 346)

Versiv Cabling Certification Product Family
Technical Reference Handbook
324
Step 3: Select a Test for Twisted Pair Cable
On the home screen, tap the test type panel, on the CHANGE
TEST screen (Figure 127), tap the test you made for twisted pair
cable, then tap USE SELECTED.
If the active ID set was not made for copper media, the tester
shows a warning. When you tap OK, the tester shows the
CHANGE CABLE IDs screen. Select the copper ID set that starts
with B-00, which you made in the previous tutorial.
GPU54.EPS
Figure 127. CHANGE TEST Screen
 To select a test, tap the test.
 To add a test to the project, tap NEW TEST.
A
B C D