Fluke Networks CertiFiber Pro Users Manual - Manual (Page 77)

Chapter 2: Get Started
Options for Cable IDs
55
 You can enter an ID each time you do a test. To do this, turn
off the Auto Save function (see page 56). Each time a test is
completed, tap SAVE (if the test passed) or FIX LATER (if the
test failed), then enter an ID manually.
 You can use LinkWare software to make a set of IDs,
download the set to the tester, then import it into a project.
See “Import an ID Set into a Project” on page 340.
 After you do a test, you can enter the ID for a test you saved
before. This lets you replace results or add different results to
a test you saved before.
 If the test failed before, and you saved the results, you can
select it on the RESULTS screen, then press TEST AGAIN to
replace the results for that ID.
Notes
Cable IDs are case-sensitive. For example, the
tester saves result with the names “A0” and “a0”
in two different records.
Cable IDs can have a maximum of 60 characters.
If you delete all the ID sets in a project, the tester
makes a default set that starts with 001.