Grain Systems PNEG-1708 - Manual (Page 27)

5. Required Tools and Critical Tool Characteristics
PNEG-1708 GSI Modular Tower Dryer 27
a. Compression channel: Regardless of what leveling tool is used, the proper reference point for
leveling the unload module of the dryer is the Compression Channel and NOT the base/leg
plates on the concrete.
See Figure 5G for reference.
The Compression Channel is the “ledge” around the unload module of the dryer. Use this as the
reference point for leveling the unit. Do NOT use base plates/feet to determine whether or not unit
is level.
Figure 5G Unload Module with Compression Channel Marked
Compression channel ledge