Grain Systems PNEG-1708 - Manual (Page 64)

64 PNEG-1708 GSI Modular Tower Dryer
11. Electrical Connections
Electrical Overview Minimal Connections
One of the most beneficial features of GSI Module Tower Dryers is the fact that much of the electrical
wiring is done at the plant prior to shipping. This is an advantage for the customer as fewer electrical
connections need to be made in field, thereby making is a quicker and safer installation. The connections
to be made in the field by the customer are:
• Air switch
• Flame sensor and ignitor wires (spark plug)
• Bindicator, outside overheat and moisture sensor
• Plenum temperature
• Gas pipe train (natural or LP) overview minimal connections
Adjustable overheat honeywell thermostat capillary is ran up to burner section.
These connections are reviewed in greater detail this section.
Another advantage of the GSI Modular Tower Dryer is the ability of the vision control box to be remote
mounted. The control box can remain on the unload module as shown and shipped or if the customer
prefers, it can be remote mounted in a more convenient location for user access or to allow auxiliary
equipment access to the tower dryer.
If the vision control panel remains mounted on the unload module of the GSI Modular Tower Dryer,
the protective rain shield should be installed as shown in
Figure 11A to help protect it from the elements.
Figure 11A
Vision control panel