Burner/blower module - special considerations – Grain Systems PNEG-1708 User Manual
Page 49
Advertising
9. Burner/Blower Module - Special Considerations
PNEG-1708 GSI Modular Tower Dryer
49
NOTE: The plank nearest the thermistor housing will need to be cut to allow it to drop into place.
This should be factory installed.
, the installer is marking the plank so that it can be field cut for proper fit.
shows the marks where the plank needs to be cut for proper fit.
Note the tabs and slots on burner/blower floor planks. This helps differentiate them from catwalk planks.
Figure 9C
Figure 9D
Tabs and slots
Thermistor conduit
Advertising