Figure 8f to, Assembling ladders, platforms and catwalks – Grain Systems PNEG-1708 User Manual
Page 36
Advertising
![background image](/manuals/277624/36/background.png)
8. Assembling Ladders, Platforms and Catwalks
36
PNEG-1708 GSI Modular Tower Dryer
3. Snug bolt safety cage hoops to safety cage brackets.
Figure 8E
Figure 8F
4. Snug bolt seven (7) vertical supports to safety cage hop halves.
5. Snug bolt top safety cage assembly to outside ladder brackets.
6. Tighten all bolts.
7. Use splice plate between ladders sections to connect.
Figure 8G
Figure 8H
WARNING
LADDER BOLTS - insert bolts toward outside of ladder, so climbers do not snag
on bolt shafts.
WARNING
Install all formed ladder sections so rungs with rough, textured side for
gripping are on top, so climbers do not slip.
Advertising