4 operation, 1 general operating principles, 1 keypad – Xylem HandyLab 600 User Manual
Page 13: Operation, General operating principles, Keypad, 4operation
HandyLab 600
Operation
ba77064e01
03/2014
13
4
Operation
4.1
General operating principles
4.1.1 Keypad
In this operating manual, keys are indicated by brackets <..> .
The key symbol (e.g. <ENTER>) generally indicates a short keystroke (under
2 sec) in this operating manual. A long keystroke (approx. 2 sec) is indicated
by the underscore behind the key symbol (e.g. <ENTER_>).
<F1>:
<F1_>:
<F2>:
<F2__>:
Softkeys providing situation dependent functions, e.g.:
<F1>/[Info]: View information on a sensor
<On/Off>:
Switches the meter on or off
<M>:
Selects the measured parameter / Quits the settings
<CAL>:
<CAL_>:
Calls up the calibration procedure
Displays the calibration data
<STO>:
<STO_>:
Saves a measured value manually
Opens the menu for the automatic save function
<RCL>:
<RCL_>:
Displays the manually stored measured values
Displays the automatically stored measured values
<><>:
<__><__>:
Menu control, navigation
Increments, decrements values
Increments, decrements values continuously
<ENTER>:
<ENTER_>:
Opens the menu for measurement settings / confirms
entries
Opens the menu for system settings
<AR>
Freezes the measured value (HOLD function)
Switches the AutoRead measurement on or off
F1
F2
CAL
STO
RCL
E N T E R
AR