Example 2 on navigation: setting the date and time, Section 4.4.5 e, Xample – Xylem HandyLab 600 User Manual
Page 20: Navigation, Etting, Date, Time
Operation
HandyLab 600
20
ba77064e01
03/2014
4.4.5 Example 2 on navigation: Setting the date and time
The meter has a clock with a date function. The date and time are indicated in
the status line of the measured value display.
When storing measured values and calibrating, the current date and time are
automatically stored as well.
The correct setting of the date and time and date format is important for the fol-
lowing functions and displays:
Current date and time
Calibration date
Identification of stored measured values.
5.
Select the General submenu with <><>.
The current selection is displayed with a frame.
6.
Open the General
submenu with <ENTER>.
7.
Open the setting mode for the Language with <ENTER>.
8.
Select the required language with <><>.
9.
Confirm the setting with <ENTER>.
The meter switches to the measuring mode.
The selected language is active.
Language:
Deutsch
Audio signal:
off
Illumination:
on
Contrast:
50 %
Shutoff time:
1 h
Temperature unit:
°C
Stability control
:
on
General
01.02.2014
08:00
Back
Language:
Deutsch
Audio signal:
off
Illumination:
on
Contrast:
50 %
Shutoff time:
1 h
Temperature unit:
°C
Stability control
:
on
General
01.02.2014
08:00
Back