Xylem HandyLab 600 User Manual
Page 21
HandyLab 600
Operation
ba77064e01
03/2014
21
Therefore, check the time at regular intervals.
Setting the date,
time and date format
The date format can be switched from the display of day, month, year
(dd.mm.yy) to the display of month, day, year (mm/dd/yy or mm.dd.yy).
The date and time are reset to default after a fall of the supply volt-
age (empty batteries).
1.
In the measured value display:
Using <ENTER_>, open the Storage & config menu.
The instrument is in the setting mode.
2.
Select and confirm the System / Clock function menu with <><> and
<ENTER>.
The setting menu for the date and time opens up.
3.
Select and confirm the Time menu with <><> and <ENTER>.
The hours are highlighted.
4.
Change and confirm the setting with <><> and <ENTER>.
The minutes are highlighted.
5.
Change and confirm the setting with <><> and <ENTER>.
The seconds are highlighted.
6.
Change and confirm the setting with <><> and <ENTER>.
The time is set.
7.
If necessary, set the Date and Date format. The setting is made similarly
to that of the time.
8.
To make further settings, switch to the next higher menu level with
Back<F1>.
or
Switch to the measured value display with <M>.
The instrument is in the measuring mode.
Date format:
dd.mm.yy
Date:
01.02.14
Time:
14:53:40
Clock function
01.02.2014
08:00
Back