Xylem HandyLab 600 - Manual (Page 18)

Operation HandyLab 600
18 ba77064e01 03/2014
 Settings
Settings are indicated by a colon. The current setting is displayed on the
right-hand side. The setting mode is opened with <ENTER>. Subsequently,
the setting can be changed with <><> and <ENTER>. Example:
 Functions
Functions are designated by the name of the function. They are immediately
carried out by confirming with <ENTER>. Example: Display the Calibration
record function.
 Messages
Information is marked by the [
i
] symbol. It cannot be selected. Example:
Language: Deutsch
Audio signal: off
Illumination: on
Contrast: 50 %
Shutoff time: 1 h
Temperature unit: °C
Stability control : on
General
01.02.2014
08:00
Back
Calibration record
Calibration data storage
Buffer:
Single-point calibration:
yes
Calibration interval: 7 d
Unit for slope: mV/pH
[ i ] 2.00 4.01 7.00
pH
01.02.2014
08:00
Back
Calibration record
Calibration data storage
Buffer:
Single-point calibration:
yes
Calibration interval: 7 d
Unit for slope: mV/pH
[ i ] 2.00 4.01 7.00
pH
01.02.2014
08:00
Back