Xylem HandyLab 600 - Manual (Page 15)

HandyLab 600 Operation
ba77064e01 03/2014 15
4.1.4 Connectors
4.1.5 Sensor info
You can display the current sensor data and sensor settings of a connected
sensor at any time. The sensor data are available in the measured value
display with the <F1>/[Info] softkey.
1 Digital sensors (pH and ORP)
2 USB B (device) interface
3 Service interface
CAUTION
Only connect sensors to the meter that cannot return any volt-
ages or currents that are not allowed (> SELV and > current
circuit with current limiting).
SI Analytics IDS sensors meet these requirements.
1. In the measured value display:
Display the sensor data (sensor name, series number) with [<F1>Info].
3 1 2
25.0
7.007
pH
°C
0 14
01.02.2014
08:00
Info USB output