YSI DIQ/S 182 XT-4 System 182 XT-4 - Manual (Page 20)

Installation System 182 XT-4
3 - 6 ba76026e01 01/2012
Result: Total power requirement P
>
4.5 W, hence an additional power
supply module is required.
Power supply with the
aid of the
MIQ/Blue PS radio
module
The MIQ/Blue PS radio module can also supply power to components
with a total of up to 7 W power consumption on an IQ S
ENSOR N ET
island. Details of this are given in the operating manual of the MIQ/
Blue PS.
3.4.3 Optimum installation of the additional MIQ power supply
module
Basic rule It is preferable to install the MIQ power supply module in the vicinity of
the IQ S
ENSOR N ET component with the highest power consumption
(example UV/VIS sensor).
Example configuration 2 Power
requirement [W]
(component)
Total power
requirement P [W] (sum
of the components)
+ 1 FDO
®
700 IQ 0.7 0.7
NitraVis
®
705 IQ 8.0 8.7
MIQ/CHV PLUS (ED = 0.1) (1.0 x 0.1 =) 0.1 8.8