YSI DIQ/S 182 XT-4 System 182 XT-4 - Manual (Page 26)

Installation System 182 XT-4
3 - 12 ba76026e01 01/2012
3.6.2 Variant 1: Stack expansion forwards
Preparing the stack
mounting
Fig. 3-2 Preparing components for stack mounting (variant 1)
Mounting the contact
base
Fig. 3-3 Mounting the contact base (variant 1)
1 Remove the covers from the drilled mounting holes (pos. 1 and
3 in Fig. 3-2).
2 Remove the contact cover (pos. 2).
3 Pull off the adhesive label (pos. 4).
For stack mounting remove label
and install contact carrier
1 3
2 4
MIQ module
DIQ/S 182 XT-4
7
5
6
DIQ/S 182 XT-4