5 top hat rail mounting, Top hat rail mounting -31, Section 3.7.5) – YSI DIQ/S 182 XT-4 System 182 XT-4 User Manual
Page 45: Mount
System 182 XT-4
Installation
3 - 31
ba76026e01
01/2012
3.7.5
Top hat rail mounting
Materials required
THS/IQ kit for top hat rail mounting (see chapter 11 A
Tools
Phillips screwdriver.
Mount
DIQ/S 182 XT-4 on top
hat rail mounting
Fig. 3-21
Mount
DIQ/S 182 XT-4 on top hat rail mounting
1
Screw the clamping assembly (item 1 in Fig. 3-21) with the two
plastic self-tapping screws (item 2) onto the back of the DIQ/
S 182 XT-4.
2
Attach the DIQ/S 182 XT-4 to the top hat rail from above using
the clamping assembly and press against the rail until the
clamping assembly clicks into place. The DIQ/S 182 XT-4 can
subsequently be pushed sideways.
3
To unhook the DIQ/S 182 XT-4, press it downwards and pull it
forwards at the bottom.
Fo
r stack m
ounting rem
ove labe
l
and
insta
ll con
tact ca
rrier
1
2