3 setting outputs, Setting outputs -5 – YSI DIQ/S 182 XT-4 System 182 XT-4 User Manual
Page 97
Advertising
System 182 XT-4
Outputs
6 - 5
ba76026e01
01/2012
6.2.3
Setting outputs
Proceeding: Setting an
output
Note
To accept all settings, highlight the Save and quit menu item at the
lower end of the setting table and press
g
. If you exit the setting table
via
m
,
e
/Quit or the Quit menu item, all changes are ignored.
1
Open the SETTINGS menu with
s
.
2
Select the menu item Relay output Rx or mA output Cy with
w
and
g
and confirm.
3
Confirm the selection Set output with
g
.
The setting table of the output is displayed.
4
Edit the setting table as described in section 4.3.2.
Advertising