YSI DIQ/S 182 XT-4 System 182 XT-4 - Manual (Page 44)

Installation System 182 XT-4
3 - 30 ba76026e01 01/2012
Fig. 3-20 Mounting DIQ/S 182 Universal Transmitter in switch panel
3 Slightly unscrew the screws (pos. 2 and 3) of the two angle
brackets (pos. 1 in Fig. 3-20), but do not remove them.
4 Push in the two angle brackets - as shown in Fig. 3-20 - into
the lateral guides of the Universal Transmitter up to the stop.
5 Tighten the screws (pos. 2).
6 Screw in the screws (pos. 3) until the screws rest snugly
against the panel.
7 Screw the DIQ/CR3 combi output module onto the DIQ/S 182
Universal Transmitter.
1
2
3
3
2
Fo r sta ck m
ou ntin g rem
ove la bel
and in
stall co
nta ct carrie
r