YSI DIQ/S 182 XT-4 System 182 XT-4 User Manual
Page 28
Advertising
Installation
System 182 XT-4
3 - 14
ba76026e01
01/2012
Stacking the
MIQ modules
Fig. 3-5
Stacking the MIQ modules (variant 1)
Fig. 3-6
Closing the enclosure (variant 1)
7
Attach the prepared DIQ/S 182 XT-4 to the cover of the
MIQ module. At the same time, ensure that the two clips on the
DIQ/S 182 XT-4 click into place in the lid of the MIQ module.
Subsequently, tighten the two screws (pos. 8 in Fig. 3-4).
8
Close the cover of the DIQ/S 182 XT-4 and fix it in place with
the two countersunk bolts (pos. 7 in Fig. 3-6).
MIQ module
DIQ/S 182 XT-4
7
MIQ module
DIQ/S 182 XT-4
Advertising